RGB Strip LED Controller

working voltage：DC5V

Number of pixels：1024 pixel *8

Speed Control：100 adjustable

Signal port：3pin connect port

SD card：128MB-2GB

Size：L175*W132*H27mm

Support chip

LPD8806/LPD8809/LPD6803/D705/1101/6909/6912/TM1803/TM1804/TM1809/TM1812/TM1903/TM1904/TM1909/TM1912/UCS6909/UCS6912/UCS7009/UCS5903/UCS1903/UCS1909/UCS1912/UCS3903/DMX512/WS2801/WS2803/WS2811/DS189/TLS3001/TLS3002/TLS3008/P9813/SM16715/SM16716/BS0901,BS0902/BS0815

1. 32-256 Gray level,Support software Gamma correction.
2. Support the rules and special-shaped handle.
3. Eight–port output,every port can support 512-1024 pixels.
4. Offline (SD Card) control ,can be multiple controllers used in combination, play back content stored in the SD card.
5. Compatible with single and dual IC, if you control a single line IC LED lights, without being connected to the CLK line.
6. New controller have a screen, The controller can be encrypted to limit the times of use.

NOTE:

1. When controller control less than 512 lamps the frame rate can reach 30fps. When T-1000 controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.
2. In the 2012 production version of the controller to add a Chinese flag on the surface, you must use the new software.